Upgrade to 3D and HDMI at a fraction of the cost of buying a new display!
The 3Dfury supports every 3D signal type in existence today including frame-packing, side-by-side, top-bottom. It is firmware updatable so that new features can be added in the future as needed!
3DFury / HDFury4
£229.00
3DFury. A.K.A HDFury4
Add 3D capabilities to ANY display (HDMI/DVi-D/RGBHV/Component)
CoMbined in dual screen with stream control, you can get 2 different pictures without the need for the RF emitter or glasses.
No 3D? No Problem!
Play 3D movies, games, satellite/cable & internet videos on any HDTV/Projector/Dual projector or monitor.
3Dfury allows you to view 3D content from your PS3, Blu-ray player, satellite/cable or internet on all standard 50/60Hz or 100/120Hz HD displays with either Digital or Analog inputs or both at the same time!
If your HDTV or projector can play regular non-3d games & Blu-ray movies then the 3dfury will work for you. it turns your existing HDTV or projector into a 3D home theater.
If your HDTV or projector cannot play HDMI content because it lacks of a HDMI input, 3Dfury can still turn it into a 3D home theater, thanks to the embedded HDMI converter based on HDfury technology.
In addition to supporting all standard 50/60Hz displays in either analog or digital (HDMI, DVI-D, RGBHV, component), the 3Dfury also supports any 100/120hz 3D Ready DLP-Link projector by brands like Optoma, Benq, Viewsonic, etc.
3Dfury is 100% plug-n-play with automatic recognition of 3D mode*
2D video just passes through the 3Dfury without any modifications (except for advanced double/triple frame mode). Just connect the 3Dfury between the source and the TV/projector. That’s it!
PS3 users need to make sure to have the latest firmware installed and go to Settings -> Display settings -> Video Output and select “automatic” so that 3D output is enabled. After that you just launch the game and that’s it - 3Dfury will take care of rest.
* Some sources may not cause the 3Dfury to autoswitch to the right 3D mode as the information is missing. In this case you can force 3Dfury to the right 3D mode.
Which projectors and TVs are supported?
Any standard 50/60Hz or 100/120Hz displays will work with 3Dfury.
3Dfury is the world first solution that work with either Digital (DVI-D/HDMI) or Analog (RGBHV/component) displays as well as ultimate Dual Projectors setup !
Which 3D glasses are right for me?
Passive glasses are only suitable for Dual projectors setup. For any others setup, Active Shutter glasses are required.
We recommend the Radio Frequency (RF) Active Shutter glasses as they are universal and work with all display types.
If you have a DLP HDTV/projector that supports 100Hz or 120Hz, the DLP-Link Active Shutter glasses can also be used.
All glasses work with 3Dfury (However they must be carefully selected for your display)
3Dfury Highlight Features:
-
Add 3D to ANY TV, Monitor, Projector (even 60hz TV !)
-
Display HDMI content on Digital and/or Analog display
-
3Dfury can output in both Digital and Analog Video/Audio simultaneously !
Therefor acting as an advanced digital/analog splitter. -
Double and Triple frame 1080p24 material up to 1080p72
-
3D mode output up to 720p144
-
Dual projectors setup using two 3Dfuse modules and passive glasses.
-
7.1 Dolby® True HD & DTS Master Audio
-
Input: HDMI 1.4 (HDCP compliant) input with 3D and Deep Colour support
-
Output: Digital HDMI / DVI-D and/or Component (YPbPr/YCbCr) and VGA (RGBHV) video output
-
All modes autodetected if possible, otherwise can be forced via button
-
3-pin mini-DIN Sync Out (for optional emitter)
-
Customisation settings available through DIP SWITCH and buttons
-
Perfectly and automatically center image in all standard NTSC/PAL component modes
-
Manually adjust horizontal screen position in all NTSC/PAL RGBHV modes
-
Performs Colour Depth Upscaling in all modes (ON/OFF user selectable)
-
Horizontal and Vertical Sync Polarity Inverter included
-
Automatic SD/HD color-space selection
-
Accept third party accessories on its output
-
Improved output cable driver for driving long cable runs (40-50′)
-
Software/Firmware upgradeable through USB
-
Sound output:
-
Analog and Digital Optical (S/PDIF 5.1 Dolby/DTS) through an innovative 3.5mm combo jack and 7.1 DTS-MA & Dolby True HD via HDMI output
-
HDMI audio passthrough
-
3Dfury Input/Output mode:
-
2D VIDEO MODE COMPATIBILITY:
-
NTSC 480i/p, PAL 576i/p, HDTV 720p/1080i/1080p
-
-
2D OUTPUT:
-
2D movies: 1080p24, 1080p48, 1080p72 (3Dfury can double and triple frame from 24hz material)
-
720p60, 720p120 (double frame from 720p60: currently under dev. ready for release date or later firmware update)
-
Passthrough any resolution
-
- 3D OUTPUT:
-
-
720p60, 720p72, 720p96, 720p120, 720p144 Frame Sequential
-
720p and/or 1080p for 60hz display
-
1080p60, 1080p72 (in dev)
-
-
WE STRONGLY ADVISE USING DOCTOR HDMI ALONGSIDE THE 3DFURY TO RESOLVE ANY POTENTIAL HDMI ISSUES.
